Register for exam and certificates at https://academy.netgear.com
This module explains how to configure and customize WiFi settings in an Insight deployment, covering fundamentals such as frequency, channel selection, signal strength, modulation, roaming, and data rate. Access point placement is also addressed, considering different project environments.
Key Takeaways:
• WiFi operates on three frequency bands: 2.4GHz, 5GHz, and 6GHz.
• Interference refers to disruptions or noise in the network.
• The 2.4GHz band is widely used for radio-based wireless local area networking (IEEE 802.11).
• Non-overlapping channels refer to distinct frequency channels within a band.
• 6GHz provides the least coverage but the highest data speeds.
• EIRP stands for Effective Isotropic Radiated Power.
• U-NII band numbers refer to the Unlicensed National Information Infrastructure radio bands.
• 6GHz access points operate between 30 and 36dBm EIRP.
• Higher minimum WiFi rates and MCS indexes can improve network performance.
• A clear network plan is essential for specifying, implementing, and troubleshooting networks.
